OR

* Note: Check with Dealer for participation in advertised Makita promotions before making purchase

 
 
1-9/16" AVT® Rotary Hammer, accepts SDS-MAX bits
Model HR4010C   
Features SpecsRelated
Anti-Vibration Technology for 2X Less Vibration
  • Powerful 11 AMP motor delivers 7 ft.lbs. of impact energy to handle the most demanding applications
  • Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
  • Soft start suppresses start-up reaction for more control and better accuracy
  • L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
  • L.E.D. power light indicates switch failure or cord damage
  • Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration
  • Variable speed control dial enables user to match the speed to the application for greater versatility
  • Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
  • Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
  • Extended life brushes are longer for more work between service intervals and less downtime
  • Automatic brush cut-off protects commutator from damage for longer tool life
  • 2-mode operation for "Hammering Only" or "Hammering with Rotation"
  • 16 bit angle settings allow the bit to be set at different positions for operating convenience
  • One-touch sliding chuck for quick bit changes
  • Lock-on switch for continuous operation ("Hammering Only" mode)
  • Rubberized ergonomic soft grip provides more comfort and control
  • Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life

Trademarks: Makita®, LXT®, AVT® and the Makita logo, Teal color and Black & White color combination are the registered trademarks of Makita.
The other trademarks, service marks and logos displayed in the Website are registered and unregistered trademarks of Makita and others.
Nothing contained on this Makita site should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed on this site without the written permission of Makita or such third party that owns the trademark.