2'' Rotary Hammer, accepts Spline bits
Model HR5000
Air Cushion Design for Hard Hitting Action
  • All ball-and-needle bearing construction for longer tool life
  • Powerful 11 AMP motor delivers 2,100 BPM for the most demanding applications
  • Built-in clutch reduces gear damage by disengaging gears if the bit binds
  • 2-mode operation for "Hammering Only" or "Hammering with Rotation" for multiple applications
  • Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts resulting in up to 50% faster drilling
  • Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
  • Automatic brush cut-off protects commutator from damage for longer tool life
  • AC/DC switch for use with alternative power source
  • Large comfortable grip swivels 360° for easy handling
  • "Spline" type drive system for maximum power
  • Factory grease packed for reduced maintenance
  • Accepts Spline bits

  • INCLUDES:
    • (1) Hex Wrench (783202-0)
    • (1) Hex Wrench (783203-8)
    • (1) Blade Wrench (783204-6)
    AMPS    11 
    Capacity (concrete drilling)    2" 
    Capacity (concrete drilling w/ core bit)    5-7/8" 
    Impact Energy (Joules)    11.8 J 
    Impact Energy (ft.lbs.)    8.7 ft.lbs. 
    Vibration (m/s²)    25 
    Blows Per Minute    2,100 BPM 
    No Load Speed    260 RPM 
    Overall Length    18-3/4" 
    Cord Length (ft)    8.2' 
    Net Weight    21.8 lbs. 
    Shipping Weight    35 lbs. 
    Bit Type    Accepts Spline shank 
    UPC Code    088381-003360 

    Trademarks: Makita®, LXT®, AVT® and the Makita logo, Teal color and Black & White color combination are the registered trademarks of Makita.
    The other trademarks, service marks and logos displayed in the Website are registered and unregistered trademarks of Makita and others.
    Nothing contained on this Makita site should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed on this site without the written permission of Makita or such third party that owns the trademark.