New Product
 
1-9/16" Rotary Hammer; Accepts SDS-MAX Bits
Model: HR4002
Torque Limiting Clutch Engineered to Reduce Gear Damage
  • Powerful 10.0 AMP motor delivers 2,500 BPM for the most demanding applications
  • Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
  • Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts resulting in up to 50% faster drilling
  • Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
  • 12 bit angle settings allow the bit to be set at different positions for operating convenience
  • Automatic brush cut-off protects commutator from damage for longer tool life
  • 2-mode operation for "Hammering Only" or "Hammering with Rotation"
  • "No hammering when idling" functions helps increase tool life
  • One-touch sliding chuck for quick bit changes
  • Soft grip handle provides increased comfort on the job
  • Accepts SDS-MAX bits

  • INCLUDES:
    • Side Handle (158131-0)
    • Depth Gauge (321248-4)
    • Bit Grease (194683-7)
    • Tool Case
    Capacity  Concrete (w/core bits)  4-1/8" 
    No Load Speed    680 RPM 
    Blows per Minute    2,500 BPM 
    Impact Energy    6.2 Joules 
        4.6 ft.lbs. 
    AMPS (120V)    10.0 
    Bit Type    Accepts SDS-MAX Bits 
    Overall Length    18" 
    Net Weight (lbs.)    14.6 
    Shipping Weight (lbs.)    17.0 
    UPC Code    088381-081566 

    Trademarks: Makita®, LXT®, AVT® and the Makita logo, Teal color and Black & White color combination are the registered trademarks of Makita.
    The other trademarks, service marks and logos displayed in the Website are registered and unregistered trademarks of Makita and others.
    Nothing contained on this Makita site should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed on this site without the written permission of Makita or such third party that owns the trademark.