1-9/16" Rotary Hammer; Accepts SDS-MAX Bits
Model: HR4001C
Increased Power with Reduced Vibration
  • Powerful 11.0 AMP motor; 1,350-2,750 BPM to handle the most demanding applications
  • Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
  • Soft start suppresses start-up reaction for more control and better accuracy
  • Variable speed control dial enables user to match the speed to the application for greater versatility
  • L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
  • L.E.D. power light indicates switch failure or cord damage
  • Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
  • Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts, resulting in up to 50% more drilling efficiency
  • Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
  • Automatic brush cut-off protects commutator from damage for longer tool life
  • 2-mode operation for "Hammering Only" or "Hammering with Rotation"
  • Lock-on slide switch for continuous operation ("Hammering Only" mode)
  • Externally accessible carbon brushes for greater serviceability
  • Ergonomic soft grip provides more comfort and control
  • 16.4 ft. jobsite cord for greater versatility and instant power
  • Accepts SDS-MAX bits

  • INCLUDES:
    • Side Handle (416299-1)
    • D-Handle (417003-1)
    • Depth Gauge (321248-4)
    • Bit Grease (194683-7)
    • Tool Case (154678-2)
    Capacity  Concrete (w/core bits)  4-1/8" 
    No Load Speed    235 - 480 RPM 
    Blows per Minute    1,350 - 2,750 BPM 
    Impact Energy    9.5 Joules 
        7.0 ft.lbs. 
    AMPS (120V)    11.0 
    Bit Type    Accepts SDS-MAX Bits 
    Overall Length    18-1/2" 
    Net Weight (lbs.)    13.8 
    Shipping Weight (lbs.)    27.6 
    UPC Code    088381-066297 

    Trademarks: Makita®, LXT®, AVT® and the Makita logo, Teal color and Black & White color combination are the registered trademarks of Makita.
    The other trademarks, service marks and logos displayed in the Website are registered and unregistered trademarks of Makita and others.
    Nothing contained on this Makita site should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed on this site without the written permission of Makita or such third party that owns the trademark.