16" 81 cc Power Cutter
Model EK8100
  • Improved decompression valve and metering spring for precise fuel regulation
  • Start capacitor with start support function stores electrical energy resulting in significantly less pull start force
  • On-Off-Choke operation switch on a single lever for operator convenience
  • Five-stage, foam-paper-nylon system with advance direction air flow provides cleaner air for better saw performance
  • SLR Muffler recycles un-burned fuel vapor for reduced scavenging-losses and up to 15% improved fuel consumption
  • Microchip controlled carburetor designed to compensate engine timing according to work load
  • Cutting arm position simply changes from center position to flush (outboard) position allowing cuts directly adjacent to curb edges, wall or directly above the ground
  • 16" wheel capacity increases maximum cutting depth to 5-3/4"
  • Cushioned operator grips with 4 vibration-absorption rubber buffers for increased operator comfort
  • Aluminum guard and wheel pressure plates to reduce weight
  • 2-mass dampening system provide reduced vibration to operator
  • Water kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank

    • (1) Universal Wrench (941-719-140)
    • (1) Torx Wrench (940-827-000)
    • (1) Carburetor Screwdriver (944-340-001)
    • (1) Adapter Ring (20mm to 1") (394-228-121)
    • (1) 16" Abrasive Cut-Off Wheel, Masonry (966-161-020)
    Engine Displacement (cu.in./cc)    4.9 cu.in. (81 cc) 
    Engine (max power)    5.6 HP/4.2 kW 
    No Load Speed/Max. Spindle Speed    9,350 / 3,820 RPM 
    Fuel Mixture    50:1 
    Fuel Tank Capacity    37 oz. 
    Arbor w/ Adaptor    20mm/1" adaptor 
    Max. Cutting Depth    5-3/4" 
    Dry Weight    23.3 lbs. 
    Shipping Weight    31.7 lbs. 
    UPC Code    088381-383998 

    Trademarks: Makita®, LXT®, AVT® and the Makita logo, Teal color and Black & White color combination are the registered trademarks of Makita.
    The other trademarks, service marks and logos displayed in the Website are registered and unregistered trademarks of Makita and others.
    Nothing contained on this Makita site should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed on this site without the written permission of Makita or such third party that owns the trademark.