|
|
|
|
 |
|
|
|
|
16" Power Cutter - 81 cc.
|
|
Model:
DPC8132
|
|
Powerful 81 cc. Engine with 5-Stage Filter System
|
|
|
|
Five-stage, foam-paper-nylon system with advanced directional air flow provides very clean air for better saw performance
Reinforced aluminum blade guard with 70° range of limitless positioning using a marked knob handle
Improved ignition system with larger flywheel and rare earth magnets for more power
Cutting arm position simply changes from center position to flush (outboard) position allowing cuts directly adjacent to curb edges, walls or directly above the ground
On-Off-Choke operating switch on a single lever for operator convenience
Cushioned operator grips with 4 vibration-absorption rubber buffers for increased operator comfort
Water kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank
Microchip controlled ignition system designed to compensate engine timing according to work load
Aluminum guard and wheel pressure plates to reduce weight
2-mass dampening system provides reduced vibration to operator
Improved exhaust emissions are EPA Phase II compliant
|
INCLUDES: |
-
16" Abrasive Wheel (966-161-020)
-
Universal Wrench (941-719-140)
-
Torx Key (940-827-000)
-
Screwdriver (944-340-001)
-
Adapter Ring (20mm to 1") (394-228-121)
-
| Optional Accessories: | - Dolly w/ water tank (DT2000)
|
|
|
Engine |
Displacement |
4.9 cu.in./81 cc. |
|
|
Max Power |
6.2 HP |
|
|
No Load Speed |
9,350 RPM |
|
Fuel |
Mixture |
50:1 |
|
|
Tank Capacity (oz.) |
37 |
|
Blades |
Max Spindle Speed |
3,750 RPM |
|
|
Wheel Diameter |
16" |
|
|
Arbor |
1" |
|
|
Max Cutting Depth |
5-3/4" |
|
Net Weight (lbs.) |
|
23.9 |
|
Shipping Weight (lbs.) |
|
32.0 |
|
UPC Code |
|
088381-323178 |
|
|
|
|
|
|
|
|
 |
|
|
|
Copyright ©
2013
Makita U.S.A., Inc. All Rights Reserved - 14930 Northam St., La Mirada, CA 90638,
USA (714) 522-8088
|
Privacy Policy
Terms of Service |
|
Trademarks: Makita®, LXT®, AVT® and the Makita logo, Teal color and Black & White color combination are the registered trademarks of Makita.
The other trademarks, service marks and logos displayed in the Website are registered and unregistered trademarks of Makita and others.
Nothing contained on this Makita site should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed on this site without the written permission of Makita or such third party that owns the trademark.
|
|