|
|
|
|
 |
|
|
|
|
1-3/4" AVT Rotary Hammer; Accepts SDS-MAX Bits
|
|
Model:
HR4510C
|
|
Anti-Vibration Technology for 2X Less Vibration
|
|
|
|
Powerful 13.5 AMP motor; 1,250-2,750 BPM to handle the most demanding jobs
Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration and directs more impact energy to the work surface for increased user comfort and greater productivity
Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
Soft start suppresses start-up reaction for more control and better accuracy
Variable speed control dial enables user to match the speed to the application for greater versatility
L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
L.E.D. power lights indicate switch failure or cord damage
2-mode operation for "Hammering Only" or "Hammering with Rotation" for multiple applications
Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts resulting in up to 50% faster drilling
Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
Extended life brushes are longer for more work between service intervals and less downtime
16 bit angle settings allow the bit to be set at different positions for operating convenience
Automatic brush cut-off protects commutator from damage for longer tool life
Lock-on slide switch for continuous operation ("Hammering Only" mode)
One-touch sliding chuck for quick bit changes
Rubberized ergonomic soft grip provides more comfort and control
Accepts SDS-MAX bits
|
INCLUDES: |
-
Side Handle (151769-0)
-
D-Handle (417003-1)
-
Depth Gauge (321248-4)
-
Bit Grease (194683-7)
-
Tool Case
|
|
Capacity |
Concrete (w/core bits) |
5" |
|
No Load Speed |
|
130 - 280 RPM |
|
Blows per Minute |
|
1,250 - 2,750 BPM |
|
Impact Energy |
|
12.5 Joules |
|
|
|
9.2 ft.lbs. |
|
AMPS (120V) |
|
13.5 |
|
Bit Type |
|
Accepts SDS-MAX Bits |
|
Overall Length |
|
18" |
|
Net Weight (lbs.) |
|
20.1 |
|
Shipping Weight (lbs.) |
|
33.0 |
|
UPC Code |
|
088381-084994 |
|
|
|
|
|
|
|
|
 |
|
|
|
Copyright ©
2013
Makita U.S.A., Inc. All Rights Reserved | 14930 Northam St., La Mirada, CA 90638,
USA (714) 522-8088
|
Privacy Policy
Terms of Service |
|
Trademarks: Makita®, LXT®, AVT® and the Makita logo, Teal color and Black & White color combination are the registered trademarks of Makita.
The other trademarks, service marks and logos displayed in the Website are registered and unregistered trademarks of Makita and others.
Nothing contained on this Makita site should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed on this site without the written permission of Makita or such third party that owns the trademark.
|
|