|
|
|
|
 |
|
|
|
|
1-1/4" AVT Rotary Hammer; Accepts SDS-PLUS Bits
|
|
Model:
HR3210C
|
|
Anti-Vibration Technology for Operator Comfort
|
|
|
|
Powerful 8.2 AMP motor; 1,650-3,300 BPM for demanding applications
Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration and directs more impact energy to the work surface for increased user comfort and greater productivity
Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
Soft start suppresses start-up reaction for more control and better accuracy
Variable speed control dial enables user to match the speed to the application for greater versatility
L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
L.E.D. power light indicates switch failure or cord damage
Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts resulting in up to 50% faster drilling
Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
24 Bit Angle Settings allow the bit to be set at 24 different positions for operating convenience
Automatic brush cut-off protects commutator from damage for longer tool life
3-mode operation for "Rotation Only", "Hammering with Rotation" or "Hammering Only" for multiple applications
One-touch sliding chuck allows for quick bit changes
Rubberized ergonomic soft grip provides more comfort and control
Accepts SDS-PLUS bits
|
INCLUDES: |
-
Side Handle (151769-0)
-
Depth Gauge (321248-4)
-
Bit Grease (194683-7)
-
Tool Case (824825-6)
|
|
Capacity |
Concrete (w/core bit) |
3-1/2" |
|
|
Steel |
1/2" |
|
|
Wood |
1-1/4" |
|
No Load Speed |
|
315 - 630 RPM |
|
Blows per Minute |
|
1,650 - 3,300 BPM |
|
Impact Energy |
|
6.4 Joules |
|
|
|
4.7 ft.lbs. |
|
AMPS (120V) |
|
8.2 |
|
Bit Type |
|
Accepts SDS-PLUS Bits |
|
Overall Length |
|
15-5/8" |
|
Net Weight (lbs.) |
|
11.4 |
|
Shipping Weight (lbs.) |
|
28.0 |
|
UPC Code |
|
088381-088718 |
|
|
|
|
|
|
|
|
 |
|
|
|
Copyright ©
2013
Makita U.S.A., Inc. All Rights Reserved | 14930 Northam St., La Mirada, CA 90638,
USA (714) 522-8088
|
Privacy Policy
Terms of Service |
|
Trademarks: Makita®, LXT®, AVT® and the Makita logo, Teal color and Black & White color combination are the registered trademarks of Makita.
The other trademarks, service marks and logos displayed in the Website are registered and unregistered trademarks of Makita and others.
Nothing contained on this Makita site should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed on this site without the written permission of Makita or such third party that owns the trademark.
|
|